Retelistica > Echipamente Active Si Pasive Pentru Retele LAN > Echipamente Active > Convertoare De Flux E1 La Ethernet Sau Fibra Optica > Network Application: E1, V.35, 10/100M Ethernet, Protocol Interface Converter
E1 to 10BaseT protocol converter | E1 to 10BaseT protocol converter |
|
|
| Caracteristici: | - Half/full duplex auto-negotiation, support VLAN.
- RJ45 interface support auto-mdix.
- Provide 2 clock types: E1 master clock, E1 line clock.
- Provide 3 loop functions: local loop, to remote loop, order remote loop.
- Have pseudo random code test function, easy the installation and maintenance.
- Support 2 impedances: 75 Ohm unbalance and 120 Ohm balance.
- Have Ethernet monitor self-reset function, equipment will not dead.
- Provide detecting realtime Ethernet communication status | | Specifications: | This convertor provide conversion from ITU-T G.703 E1 channel to Ethernet interface. used widely in connecting between WAN and LAN, monitoring,etc.
E1 Interface:
- Interface standard: according with G.703
- Interface Rate 2.048Mbps+-50ppm
- Jitter tolerance according with G.742 and G.823.
- Transmission capability 1*E1
- Clock inter-clock, line-clock
- Connector BNC 75Ω/RJ45 120Ω
- E1 Impedance 75Ω(unbalance), 120Ω(balance)
10/100 Base-T interface:
- Interface Rate: 10/100Mbps
- Full and half duplex auto-negotiation
- Interface character match IEEE802.3, IEEE802.1Q(VLAN).
- Connector RJ45, Auto fit for straight and cross
- MAC address capability 4096
Working Environment:
- Power supply AC220VAC 110V / DC 48VDC +24V
- Power consumption ≤5W
- Working temperature: 0°C ~ 50°C
- Storage temperature: -40°C ~ +70°C
- Humidity: 95 %
| |
