Booster for 802.11G 500mW,incl.SMA cable. Repotec - RP-WR1102.5G


Cod Produs [4625]

Pentru amanunte suplimentare cu referire la: caracteristici, stoc, pret, termen de livrare, ale acestui produs, sunati la 0745.063.200 sau 0767.820.422 !

<< 500mW 2.4GHz fix-gain Booster for 802.11B. Repotec - RP-WR1102.5

Repotec - RP-WR1102G.Booster for 802.11G 200mW,incl.SMA cable. >>

Booster for 802.11G 500mW,incl.SMA cable. Repotec - RP-WR1102.5G
Retelistica > Echipamente Pentru Retele Wireless > Antene, Boostere, Conectica, Accesorii > Boostere 2,4GHz, Splittere 2,4GHz, Adaptoare Si Conectica

Repotec RP-WR1102G - Fix-Gain Booster for 802.11g

The device is an indoor solution bi-directional Amplifiers designed for 2.4 GHz wireless LAN. It comes with an easy plug-and-play installation,which works together with an indoor Wireless Access Point to improve its operation range and performanta. The unit is ideal for use with 2.4 GHz Frequency Hopping or Direct Sequence Spread Spectrum radio modems and 11 Mbit/sec IEEE 802.11b devices.

The amplifiers increase range by providing transmit gain as well as low-noise receive gain. This receive gain increases the receive sensitivity of wireless LAN Access PoINTERIOR

FEATURES

  • LLower power,low cost and light weight
  • Plug and play
  • High gain and high performanta
  • Make indoor true wireless
  • Enjoy broadband wireless everywhere

SPECIFICATIONS

Operating Range 2400-2500MHz
Operating Mode Bi-directional,half duplex,auto-switching via carrier sensing
Transmit Gain 10 dB(Adjustable)
Impedance 50ohm
Frequency Response ± dB over operating range
Output Power 100/200/500mW,1W
Transmit Input Power Max. 200mW (23dBm), Min. 1mW(0dBm)
TX Input Power 10dB Norminal
Receiver Gain 14dB typical
Noise Figure 3.5dB typical
Connectors SMA-,female,50ohm
Lightning Protection Direct DC ground at antenna connector
DC surge protection at 5 VDC input from transmission cable
Power Consumption 6V DC max.current, <800mA, 90~264V for AC adaptor.
Dimensions(cm) Bi-directional amplifier:L 7.7 cm x W 5.5cm xH 2.9cm
5V DC injector:L 6.3cm x W 4.5cm xH 2.0cm
Operating Temperature Bi-directional amplifier: -20°C to +70°C
5V DC injector:-30°C to +70°C
Humidity up to 100% Relative Humidity
5V DC injector:10% to 75% Relative Humidity
 
Traducere