NOU! Oferim pe capsator.ro Clesti si Inele metalice zincate pentru asamblarea si fixarea de produse din sarma. Capsatoarele marca Regur® din Germania, sunt garantate pe viata si se folosesc in special la constructia de structuri din plasa sarma, incepand cu colivii de prepelite, custi de iepuri, garduri din plasa pana la fixare si montare de gard bordurat, gabioane. Clestele capsator cu inele metalice zincate sau inele din aluminiu zincat este foarte util si in tapiteria auto si productia de mobilier tapitat. Pentru mai multe detalii va asteptam pe capsator.ro!

Cablu de incendiu J-Y(St)Y oferit de Electro-Cablu.ro. Cablu de comunicatii rezistent la incendiu cu intarziere la flacara. Cablul de semnalizare J-YStY reizista foarte bine in instalatii electronice amplasate in zone cu factor de risc ridicat. Cablul de incendiu asigura comunicarea intre echipamente electronice, sisteme de calculatoare, echipamente si utilaje.

Pe www.bwbfamily.ro gasiti echipamente electrice si electronice ca: stabilizatoare de tensiune, accesorii si componente pentru receptia prin antene de satelit, cabluri si conductori pentru instalatii electrice, transmisii de date si telefonie, aparate de masura si control, elemente de automatizari, statii radio CB, scule si unelte, surse si corpuri de iluminat.

Cablu de energie CYABY-F, ACYAbY-F, MCCG, CYY-F, MYYM, TYIR si Conductor FY, AFY, MYF, HO7V-U, HO7V-R . Pentru oferte de pret si stocuri, vizitati www.cabluelectric.ro sau sunati la 021.336.7774 pentru consultanta despre cabluri si conductori.

bwbfamily.ro: Realizam la comanda tablouri electrice BMP, bloc de transformare si masurare monofazic BMPM, bloc de transformare si masurare trifazic BMPT.

Nou! Platbanda de impamantare 25x4 si 40x4. Clise si cutii de impamantare pentru platbanda si accesorii.

bwbfamily.ro: Realizam la comanda tablouri electrice! Bloc de masura si protectie trifazat in carcasa metalica sau policarbonat, Firida de distributie si contorizare de palier in carcasa metalica, Firida de bransament in carcasa metalica sau fibra de sticla, Tablouri de distributie din posturi de transformare, Cutii de distributie pentru post de transformare, Tablouri generale de distributie, Compensare factor de putere, Aclansarea automata a rezervei, Confectie metalica. Executam in functie de dimensiunile cerute dulapuri metalice, cutii metalice, tubulatura pentru ventilatie.

Echipament de examinare automata MI 2097

Cod Produs [TP.MI2097]

Pentru amanunte suplimentare cu referire la: caracteristici, stoc, pret, termen de livrare, ale acestui produs, sunati la 0745.063.200 sau 0767.820.422 !

<< Panouri de ecanare magnetica,Magno Shield

Echipament de testare automata MI 3001 >>

MI-2097 Automated Microwave Measurement Systems
Measurement Applications: More Choices and Solutions
The MI-2097 family offers a full menu of measurement applications, providing the user with a selection of both far-field and near-field applications. Specialty and custom applications for radome, RCS, component and wireless applications are also available. Custom features, required for specialized testing, can be evaluated by our applications and system engineering resources to assist buyers in identification of the right solution. The MI-2097 is delivered with acquisition and analysis applications installed. Optional analysis applications include:

Planar Near-Field
Spherical Near-Field
Cylindrical Near-Field
Radome
Radar Cross Section
Component S-Parameter
Individual Applications such as EIRP and Antenna VSWR

MI-2097 Automated Microwave Measurement Systems
MI Technologies' MI-2097 Automated Microwave Measurement Systems (AMMS) offer the user an extensive array of features and options that provide solutions for the most demanding measurement requirements. The MI-2097 family of systems allow users to fully automate the antenna measurement process from setup to analysis and reports.

Multi-Port Measurements
A full line of MI-3320 Series Multiplexers provide for up to 16 ports in various combinations for receive and transmit lines. Switching times for the Multiplexers do not degrade the measurement speed of the receiver. The MI-2097 also supports up to 16 bits of general purpose switch/beam steering computer control.

Multi-Frequency
The MI-1797 receiver subsystem supports automated multi-frequency measurement scenarios. Up to 1,024 different frequencies can be acquired at each measurement interval. Typically, frequency changes can be accomplished at a rate near 1,000 steps per second with the MI-3100 Series Signal Sources.

Increased Speed and Productivity
Productivity improvement solutions are more important in today's business than ever before. The ability to take 10,000 quality measurements per second can provide tremendous productivity gains. From production testing to engineering design, the MI-2097 will provide the results-oriented test and measurement solutions needed to test the products we use today and those we are designing for tomorrow.

At up to 10,000 measurements per second of Phase and Amplitude data with 90dB of dynamic range in CW mode, the MI-2097 is one of the fastest measurement systems available today. The AMMS features an integrated MI-1797 Receiver configured to optimize speed & performanta at the system level. A high-speed secondary data line provides the capability to move vast amounts of measurement data from the receiver instruments to the workstation without interfering in system control functions. This compares with approximately 100 equivalent measurements per second across a GPIB based interface.

Multi-Frequency
The MI-1797 receiver subsystem supports automated multi-frequency measurement scenarios. Up to 1,024 different frequencies can be acquired at each measurement interval. Typically, frequency changes can be accomplished at a rate near 1,000 steps per second with the MI-3100 Series Signal Sources.

Easy Acquisition and Analysis
The MI-2097 is delivered with extensive acquisition and analysis capability. The MI-3001 Data Acquisition and Analysis Workstation is the user interface to all functions of the measurement system.
The MI-3001 utilizes graphical screens and drop-down menus covering installation, equipment selection, and instrument configurations for the receiver, signal source, and positioning axes.Custom features, required for specialized testing, can be evaluated by our applications and system engineering resources to assist buyers in identification of the right solution. The MI-2097 is delivered with acquisition and analysis applications installed. The user is guided on setting up acquisitions and creating data files as well as editing acquisition parameters. Screens for data, motion, frequency, confirmation plots and others are provided.

The Plot mode provides the user interface for operating the plot definition editor for plotting data in rectangular, polar, contour and isometric formats.

A Sequencer Module enables the operator to create script files, containing operational instructions for performing full acquisitions and analysis scenarios. Scripts can be saved, edited and rerun at the operator's discretion.

Optional software packages are available for near-field analyses of planar, spherical and cylindrical configurations. Radome and RCS applications are also available, along with individual analyses such as EIRP.

The MI-3001 utilizes graphical screens and drop-down menus covering installation, equipment selection, and instrument configurations for the receiver, signal source, and positioning axes. The user is guided on setting up acquisitions and creating data files as well as editing acquisition parameters. Screens for data, motion, frequency, confirmation plots and others are provided.

The Plot mode provides the user interface for operating the plot definition editor for plotting data in rectangular, polar, contour and isometric formats.

A Sequencer Module enables the operator to create script files, containing operational instructions for performing full acquisitions and analysis scenarios. Scripts can be saved, edited and rerun at the operator's discretion.

Optional software packages are available for near-field analyses of planar, spherical and cylindrical configurations. Radome and RCS applications are also available, along with individual analyses such as EIRP.

Multi-Axis Control
The base MI-2097 includes a MI-4192 multi-axis position controller and power amplifier set. The controller can sequentially operate up to four positioner axes. The MI-2097 application software is expansion ready for up to two additional position controllers and can manage up to 16 axes of motion with options.

Supports MI Technologies' Positioners and Scanners
MI Technologies manufactures a full line of rotary and linear positioning products, specifically developed for the demands of antenna measurement functions. These positioners can also be used in other applications as well as for Antenna Measurement. The MI-2097 systems are a perfect match for all these positioning devices. There is an MI Technologies positioner suitable for use with virtually every measurement application and configuration. Positioner capacities up to 400,000 pounds vertical load provide an extensive range of capabilities for these applications.

Precision planar scanners with linear motor drives as well as belt and gear drive versions provide a large selection opportunity for user applications.

Also, a wide range of positioners and scanners previously manufactured by MI Technologies or Scientific-Atlanta are supported by the MI-2097 systems. Interface adapters have been developed which can provide interfaces to existing positioners as well as the existing cabling.