Descriere:
The GigaFlex PS6+ Module is a new punch down UTP connector within the Modular Connectivity product line. The GigaFlex PS6+ Module is based on a patent-pending Encapsulated Lead Frame technology ensuring excellent long-term reliability as well as extremely stable transmission performanta. The unique in-line IDC termination interface allows quick and easy installation using GigaFlex, BIX, 110 or Krone connecting tools. The GigaFlex PS6+ is the module of choice for terminating UTP cables into the MediaFlex and Interface Outlet Series. It can also be mixed and matched with a wide variety of MDVO adapters, boxes and patch panels to suit practically any installation configuration for workstation outlet, consolidation point and telecommunications room applications. The unmatched PS6-rated performanta exceeds all parameters specified in the Category 6 standard. All performanta characteristics including NEXT, FEXT, attenuation and return loss have been set to guarantee transmission performanta up to 300 MHz. The GigaFlex PS6+ Module is designed to be used with the IBDN System 2400 and the IBDN System 4800LX. |
Technical specifications: | IDC Termination Interface - Gas-tight connection - insulation slicing of 22 to 24 AWG (0.64 to 0.51 mm) plastic insulated solid copper conductors - Durability: 10 insertions of any combination of wire gauge. Modular Jacks - 8-pin or 6-pin connector, FCC part 68, Subpart F and IEC-603-7 compliant - 8-pin connector is compatible with 6-pin plugs - Durability: 1000 mating cycles. Physical Characteristics - Dimensions: With the protective cap: 20.8 x 19.7 x 34.7 mm Materials - Module snap-in: fire-retardant plastic, UL94V-0, gray, almond, white, black, orange, red, yellow, green, blue, purple or brown - IDC housing: fire-retardant plastic, UL94V-0, white - Protective cap: fire-retardant plastic, UL94V-0, clear - ID Tab: Polypropylene, gray, almond, white, black, orange, red, yellow, green, blue, purple or brown. IDC Termination Interface - IDC clip material: copper alloy with nickel plating - Encapsulated clips, in fire-retardant, UL94V-0, plastic support, black. Modular Jacks - Contact material: copper alloy with 50 micro-inches gold over nickel. Transmission Characteristics PS6-Rated Modules - Designed to exceed the Category 6 standard - Minimum average values measured at 100 MHz with PS6 plugs: Parameter | Value | NEXT | 55.1 dB | PSNEXT | 52.0 dB | FEXT | 49.8 dB | PSFEXT | 46.9 dB | Attenuation | 0.10 dB | Return Loss | 27.0 dB |
Electrical Characteristics - Dielectric strength: 1,000 V RMS at 60 Hz for 1 minute - Current rating: 1.5 A maximum - Insulation resistance: 200 MΩ minimum - Contact resistance: 1 mΩ per contact. | |