Retelistica > Echipamente Active Si Pasive Pentru Retele LAN > Echipamente Active > Media Convertoare Pentru Fibra > Mediaconvertoare 10/100
WDM Fast Ethernet Media Converter 10/100Base-TX, 1550nmTX/1310nmRX
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Adopts WDM technology, transmitting and receiving data on one single fiber.
- Extend fiber distance up to 20-60km
Descriere
This Gigabit Ethernet Media Converter is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, the media converter takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the media converter is designed for use with single-mode fiber cable utilizing the SC-Type connector. The media converter supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the media converter should work at 1310nm on transferring data and at 1550nm on receiving data.
Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19" system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The media converter will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.
Caracteristici
- Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
- Provide one SC fiber connector and one RJ-45 connector.
- Auto negotiation of duplex mode on TX port.
- Auto negotiation of 10/100Mbps and auto MID/MID-X for TX port.
- Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port.
- Adopts WDM technology, transmitting and receiving data on one single fiber.
- Extend fiber distance up to 20-60km.
- Easy-to-view LED indicators provide status to monitor network activity easily.
- External power supply. (DC 5V / 2A)
SPECIFICATIONS
| Standards | IEEE 802.3 / IEEE 802.3u |
| Connector | 1 SC fiber optic; 1 RJ45 jack |
| Max. Distance | Twisted Pair (Cat.5):100m
Single-mode Fiber Optic: 20km |
| Power | External Power Adapter. (DC 5V / 2A) |
| Temperature | Operation: 0° to 40°C
Storage: -10° to 70°C |
| Humidity | 10%-90% RH Non-condensing |
| Dimensions (LxWxH) | 94.5mmx73mmx27mm |
| Output Center Wavelength | 1550nmTX/1310nmRX |
| Transmission Media | Single-mode Fiber,Cat-5 |
